Dissipation Elements at the Flame Surface in Methane Diffusion Flame (B. Hentschel and D. Denker)

Flame in Slotburner (S. Kruse)

Particle Charged Flow (E. Varea)

DNS of a scaled-up Diesel injector

Dissipation Element Analysis of Methane Diffusion Flame (D. Denker)

DNS of a scaled-up Diesel injector (M. Bode)

Quartz nozzle sampling in a methane counterflow flame (M. Baroncelli)

Oxyfuel coal combustion in a hot gas stream (D. Felsmann)

Turbulent/non-turbulent interface in high Reynolds number Jet (D. Denker and B. Hentschel)

Abhishek Deshmukh, M.Sc.

E-Mail:  a.deshmukh(at)itv.rwth-aachen.de

Adresse:

Institut für Technische Verbrennung
RWTH Aachen University
Templergraben 64
52056 Aachen

Telefon: +49 (0)241 80-94622
Telefax: +49 (0)241 80-92923

Büro:   209.1 (2. Etage)


Arbeitsgebiete

Forschung: 

  • Shock capturing schemes in the context of cavitating bubbles
  • LES/RANS of compressible gas jets and modeling
  • Investigation of primary breakup of liquid biofuels using LES/DNS
  • Reduced order models for spray characterization

Lehre: Turbulent Flows


Publications: -

  • Bode, M., Deshmukh, A., Göbbert, J.H. & Pitsch, H., CIAO: Multiphysics, multiscale Navier-Stokes solver for turbulent reacting flows in complex geometries Brömmel, D., Frings, W., & Wylie, B. J. N., eds. , 2016.
     
  • Deshmukh, A.Y., Mayer, D., Bode, M., Falkenstein, T., Pitsch, H., Khosravi, M., van Overbrüggen, T. & Schröder, W., LES of Direct Gas Injection in Internal Combustion Engines. In LES for Internal Combustion Engine Flows LES4ICE, November 30th-December 1st, France. 2016.
     
  • Bode, M., Deshmukh, A., Kirsch, V., Reddemann, M., Kneer, R. & Pitsch, H., Direct numerical simulations of novel biofuels for predicting spray characteristics. In ICLASS 2015, 13th International Conference on Liquid Atomization and Spray Systems, August 23rd-27th, Tainan, Taiwan. 2015.
     
  • Hammer, N., Satzger, H., Jamitzky, F., Allalen, M., Block, A., Karmakar, A., Brehm, M., Bader, R., Iapichino, L., Ragagnin, A., Karakasis, V., Kranzlmüller, D., Bode, A., Huber, H., Kühn, M., Machado, R., Grünewald, D., Edelmann, P.V.F., Röpke, F.K., Wittmann, M., Zeiser, T., Wellein, G., Mathias, G., Schwörer, M., Lorenzen, K., Federrath, C., Klessen, R., Bamberg, K., Ruhl, H., Schornbaum, F., Bauer, M., Nikhil, A., Qi, J., Klimach, H., Stüben, H., Deshmukh, A., Falkenstein, T., Dolag, K. & Petkova, M., Extreme Scale-Out SuperMUC Phase 2, lessons learned. ParCo. 2015.
     
  • Deshmukh, A., Bode, M., Pitsch, H., Kirsch, V., Reddemann, M., Palmer, J., Kneer, R., van Overbrüggen, T., Schröder, W., Liebergesell, B., Bardow, A., Ottenwälder, T. & Pischinger, S., Spray breakup and mixture formation of novel biofuels. In 3rd TMFB International Conference, June 23rd-25th, Aachen, Germany. 2015.
     
  • Dhamangaonkar, P.R., Deshmukh, A., Pansare, S. & Nandgaonkar, M.R., Design and Computational Validation of In-Line Bare Tube Economizer for a 210 MW Pulverized Coal Fired Boiler. , (56284), p.V06AT07A047--. 2013.
     
  • Dhamangaonkar, P.R., Kajale, S.R., Nandgaonkar, M.R., Deshmukh, A.Y., Deshmukh, A.D. & Thakur, S.G., Use of Cold Air Velocity Test (CAVT) to Locate Erosion Prone Zones in Pulverized Coal Fired Utility Boiler, World Congress on Engineering. 2011.
     
  • Deshmukh, A.Y., Technical and Economical Feasibility of Biofuels for Engine Applications. In SAE Technical Paper. SAE International. 2009.
     

Offene Stellen/Arbeiten

 

Bei Interesse an Projekt-, Bachelor-, Master-, Diplomarbeiten/Hiwistellen anrufen, eine E-Mail schicken oder persönlich vorbeikommen. Abhängig von den Interessen und Vorkenntnissen kann ein individueller Themenvorschlag gemacht werden.